Tap Tempo

Tap along with music to estimate BPM from recent beat intervals and see timing consistency.

About this tool

Tap Tempo works out the tempo of a song by listening to your taps instead of its audio. Tap the pad or press the spacebar in time with the music and you get a BPM reading and a measure of how steady your tapping was. It is for anyone who needs a quick tempo without loading a file.

How to use

Tap the pad or press Space at least four times. Reset when the tempo changes; use half or double tempo where needed.

  1. Play the song or the beat you want to measure.
  2. Tap the TAP / SPACE pad with the mouse or finger, or press the spacebar, on every beat. Four or more taps are needed before a tempo appears.
  3. Read the BPM, the tap count and the Timing variation percentage under it.
  4. Keep tapping for several bars until the number settles.
  5. Use Reset to start over when the tempo changes, and the ÷ 2 and × 2 buttons to switch between half-time and double-time.

Production tips

  • Count along in your head and tap on the beat you feel as the main pulse. Quarter notes are the usual choice.
  • The tool uses your most recent taps. If you pause for more than three seconds, it starts a new measurement.
  • A low timing variation means your taps were even. If it is high, reset and tap again, or focus on a section with a clearer pulse.
  • Compare the result with the BPM Detector. If the two agree, you can trust the number; if they differ by half or double, check with the ÷ 2 and × 2 buttons.

Know the limits

Human timing affects the result. A steady pulse over several bars is more reliable than two taps.

Frequently asked questions

How many taps do I need?

Four taps give a first reading, and the tool keeps the latest 17 taps. A steady pulse over several bars is more reliable than a few quick taps.

Why does the number jump around?

Human timing is never perfectly even. The tool ignores taps that are far from your typical interval and shows the timing variation, so keep tapping steadily to let the average settle.

Does it listen to audio?

No. It only measures the time between your clicks, taps or key presses, which is why it works with any music source and does not need a microphone.

Audio is processed on your device. JavaScript is needed to use the tool.