Mono Converter
Fold stereo to mono, or extract only the left, right, mid or side signal.
About this tool
Mono Converter folds a stereo file down to mono, or pulls out just one part of it: the left channel, the right channel or the side (difference) signal. Producers use it to check mono compatibility, to prepare sounds for mono playback and to inspect what lives in the stereo image.
How to use
Choose the desired channel operation, listen for phase cancellation and export the mono result.
- Drop a stereo audio file onto the upload area, or press Load example.
- Choose a Channel operation: Mono sum, Left only, Right only or Side difference.
- Press Process audio. The result is a single-channel file with the same sample rate.
- Listen to the Result and compare it with Original. Listen for hollow or thin sound, which can mean phase cancellation.
- Press Download output to save a 24-bit mono WAV.
Production tips
- Check a finished mix with Mono sum. If bass, vocals or the lead drop in level, there may be out-of-phase stereo content, so compare with the Polarity Inverter and Stereo Width tools.
- The side difference shows what lives only in the stereo field, such as reverb and wide synths. It is the difference between left and right, not a separated instrument.
- Left only and Right only help find a channel that has noise or a problem the other channel does not.
- Bass and kick are usually best kept in the center, so check them in mono after you widen anything.
Know the limits
Summing opposite-polarity channels can cancel audio. Side extraction is the difference signal, not a separated instrument.
Frequently asked questions
Why does my mono result sound thinner than the stereo file?
When the left and right channels have opposite polarity or large phase differences, they partly cancel out when summed. The thin sound is a sign that your stereo file would also lose content on mono speakers.
Does it work on mono files?
Mono sum and Left only work with any file, but Right only and Side difference need stereo audio. The tool will show a message if the file has only one channel.
What is the side signal?
It is half the difference between the left and right channels. It contains everything that is not identical in both channels, which is a useful hint for reverb and stereo effects, but it does not separate instruments.
Audio is processed on your device. JavaScript is needed to use the tool.