Fade Designer
Apply independent fade-in and fade-out times with linear or equal-power curves.
About this tool
Fade Designer applies a fade-in and a fade-out to an audio file with separate lengths and a choice between linear and equal-power curves. It is useful for smoothing the edges of samples, ending loops without clicks and shaping the start and end of stems.
How to use
Load audio, set both fade lengths, choose a curve and compare the result before export.
- Drop an audio file onto the upload area, or press Load example to use a generated loop.
- Set Fade in (seconds) and Fade out (seconds). Both fields accept values from 0 to 600 and use steps of 0.01.
- Choose the Curve: Linear or Equal power.
- Press Process audio, then compare Result with Original to hear how the edges change.
- Press Download output to save a 24-bit WAV.
Production tips
- For drum hits and short one-shots, a fade-in of 5 to 10 ms is usually enough to remove clicks while keeping the punch.
- Use the equal-power curve for fades that should sound like a smooth, even drop in volume. A linear fade can seem to stay loud for a while and then collapse near the end.
- Make the fade-out about as long as the natural decay of the sound. A fade that is much shorter than the tail will sound like a cut.
- If both fades together are longer than the file, they overlap and the whole clip gets quieter. Shorten one of them.
Know the limits
Fades cannot exceed the clip length. Long overlapping fades can attenuate the whole clip.
Frequently asked questions
What is the difference between linear and equal power?
A linear fade changes the amplitude at a constant rate. The equal-power option follows a sine curve, which sounds smoother to many listeners, especially for longer fades.
Can the fade be longer than the file?
The fade length is limited by the clip length. If the fades overlap, the combined gain makes the whole file quieter, so shorten them if the result is too soft.
Does the tool change the sample rate or channels?
No. It multiplies the samples by a gain curve and keeps the sample rate and channel layout. The file is exported as 24-bit WAV.
Audio is processed on your device. JavaScript is needed to use the tool.